This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.


How to fix chipped granite

Fix Chipped Granite with HIMG Surface Repair Kits

Granite has been one of the most popular countertop choices among homeowners and contractors.

This natural stone gives you an endless array of colors, styles and patterns to choose from, it is also one of the most durable materials you can choose for kitchen countertops, bathroom vanity tops, backsplashes and many other home surfaces.

Granite is resistant to most acids, very durable, and easy to maintain which makes it a perfect choice for homeowners looking for stone countertops.

But….What happens if you find a chip, nick or small defect in your granite countertop?

HIMG® DIY Light Cure Acrylic Surface Repair Kits are the time saving​, cost effective , eco-friendly ​solution for this kind of defects, including granite, marble, enamel, porcelain, and other ceramics. 

Instead of the waste and costs of replacing an entire countertop, our DIY Surface Repair Kits can be used by anyone to restore the chipped surfaces in minutes. 

You simply follow the Step By Step detailed instructions and we can guarantee the results.

Step 1     Prepare the surface

Step 2     Apply Light Cure Acrylic

Step 3     Add Curing Strip

Step 4     Cure with LED light

Step 5     Remove curing strip

Step 6.    Sand

Step 7     Polish

1. Prepare the Granite Surface Clean the defect and around the area so that it is free from dust and dirt. Make sure the area is completely dry before proceeding to step 2.

2. Apply Light Cure Acrylic Light Cure Acrylic is an effective repair material for nicks, gouges, chips, and  scratches in granite, and also in marble, porcelain, corian, travertine and other natural stone and acrylic surfaces. LCA™ is non-toxic and completely safe for food prep areas, so your granite countertop in the kitchen will be perfectly safe after the repair. Place an applicator tip on the Light Cure Acrylic™ syringe and apply a small amount of repair acrylic in the granite defect. For best results, DO NOT OVERFILL. A perfectly filled and cured repair will not require sanding or polishing. We suggest that you make repairs in small sections, no larger than 1/4” or 6mm. Deeper damages will require curing in layers. Additional colors of Light Cure Acrylic™ repair material can be purchased for color blending applications. 

3. Add Curing Strip Place a curing strip on top of the uncured Light Cure Acrylic. Using a small wooden stick, gently touch the top of the curing strip to help push the repair material into the damage. If your damage is larger than a curing strip, you can use clear packing tape, folded sticky side to sticky side. Packing tape is also helpful when repairing an edge, used as a retaining wall to hold the repair material in place. 

4. Cure with LED light Focus the blue light just above the curing strip. The Light Cure Acrylic will not cure on its own. Exposure duration will depend on the size of the damage in the granite, but it is safe to start with 5-7 minutes. Before removing the curing strip, use the wooden stick to test for hardness. Additional LED exposure may be needed, especially for larger damages. We recommend focusing the LED light in different sections of the damage.

5. Remove the Curing Strip Remove the curing strip and verify for a complete cure. If the repair remains tacky after additional LED exposure, you may use rubbing alcohol to gently wipe the repaired surface.

6. Sand Use yellow 220 grit sandpaper to remove any over filled material. Rub in gentle circles. For increased shine, use grey 2000 grit wet sanding paper with a dab of water. Be extremely careful when sanding softer surfaces as hazing or scratching may occur if you are too aggressive. For best results, sand the repaired area to make it level with the surrounding granite.

7. Polish Gently apply a few drops of polishing paste on the repaired area to wipe away dust while polishing the repaired granite for maximum shine.

NOTE: It is important to follow each step to ensure an efficient granite countertop repair and get optimal results. If tackiness remains after full curing duration, wipe with rubbing alcohol then sand and polish as directed above.

After this your granite countertop will be as good as new and people who didn’t know where the defect was will have a hard time finding it.

If you prefer to see a video, watch the one below or see more videos here.

Read More From The Blog

15% off Spirng time offer for surface repair kits

Spring Cleaning

After a long winter and lots of time spent indoors it is time to start some spring cleaning.   Spring home care is important for your home's health, but it can...

Read more